High-performance drill bit, solid carbide 12XD Ø3.00 mm, IC, HA, UNI Pro TiAlN

High-performance drill bit, solid carbide 12XD Ø3.00 mm, IC, HA, UNI Pro TiAlN
High-performance drill bit, solid carbide 12XD Ø3.00 mm, IC, HA, UNI Pro TiAlN High-performance drill bit, solid carbide 12XD Ø3.00 mm, IC, HA, UNI Pro TiAlN
Price:
247,00 €
prices excl. vat plus shipping costs

Stock status
in stock
External stock
available
Tool Finder

Ordered by 19:30 - delivered tomorrow.

TiAlNplus HPC 12D solid carbide high-performance drill bit with internal cooling
  • Optimised shank diameter tolerance for use as a holding fixture in power chucks and hydraulic expansion chucks
  • Cutting material: Solid carbide ultra-fine grain TiAlNplus
  • Efficient drilling in different materials
  • Newly developed geometry in conjunction with a customised multilayer coating for enhanced performance
  • Special cutting edge finishing reduces micro-nicks and increases service life
  • Excellent alignment precision thanks to 4 guide chamfers
  • High process reliability, even at difficult-to-reach bore depths
  • With internal cooling

TiAlNplus HPC 12D solid carbide high-performance drill bit with internal cooling
  • Optimised shank diameter tolerance for use as a holding fixture in power chucks and hydraulic expansion chucks
  • Cutting material: Solid carbide ultra-fine grain TiAlNplus
  • Efficient drilling in different materials
  • Newly developed geometry in conjunction with a customised multilayer coating for enhanced performance
  • Special cutting edge finishing reduces micro-nicks and increases service life
  • Excellent alignment precision thanks to 4 guide chamfers
  • High process reliability, even at difficult-to-reach bore depths
  • With internal cooling

Article no./ATORN no.
1115720300 / 10915572
Packaging unit
1
Catalogue page
KS-0155
Cutting values
SW-0368

Technical characteristics

A-Maß 0,62 mm
Angle of the tip - S 135 °
Angle of the tip - S 135 °
Coating TiAlN plus
Coating TiAlN plus
Coolant supply Internal
Coolant supply Internal
Cutting data Cutting angle Information - yes
Cutting data Cutting angle Information - yes
Cutting material Solid carbide
Cutting material Solid carbide
D 3,00 mm
D 3,00 mm
D1 6 mm
D1 6 mm
DIN 0 - nicht applicable
DIN 0 - nicht applicable
Eignung Edelstahl gesamt 1
Eignung nicht Eisen gesamt 2
Eignung Titan/Nickel/Super gesamt 2
Feed f steel < 1000 N/mm² 0,10 mm/rev
Feed f steel < 1000 N/mm² 0,10 mm/rev
fitness hartl total 3
Halslänge 54 mm
Konischer Übergang Halskontur (xsg) 56 mm
Kraglänge 56 mm
L 92 mm
L 92 mm
L1 54 mm
L1 54 mm
Max. drilling depth (D) 12xD
Max. drilling depth (D) 12xD
Nutzlänge 48 mm
Schaftlänge 36 mm
Schaftlänge berechnet 36 mm
Schneidendurchmesser max. 20,0 mm
Schneidendurchmesser min. 3,0 mm
Schneidendurchmesser min./max. 3,0-20,0 mm
Schnittgeschwindigkeit (Bronze kurz) Eignung 1
Schnittgeschwindigkeit (Bronze kurz) Vc 160,00 m/min
Schnittgeschwindigkeit (Bronze lang) Eignung 2
Schnittgeschwindigkeit (Bronze lang) Vc 130,00 m/min
Schnittgeschwindigkeit (Kunststoff ) Eignung 2
Schnittgeschwindigkeit (Kunststoff ) Vc 60,00 m/min
Schnittgeschwindigkeit (Messing lang) Eignung 2
Schnittgeschwindigkeit (Messing lang) Vc 180,00 m/min
Section shape Split point
Section shape Split point
Tolerance of cutting edge diameter h7
Tolerance of cutting edge diameter h7
Tolerance of shank diameter h6
Tolerance of shank diameter h6
Tool holding device HA parallel shank
Tool holding device HA parallel shank
Twist angle 30°
Twist angle 30°
Type HPC UNI
Type HPC UNI
Z 2 pc.
Z 2 pc.

Usage characteristics

aluminium < 8 % Si
aluminium < 8 % Si
aluminium ≥ 8 % Si
aluminium ≥ 8 % Si
brass short
brass short
cast iron GG/GTS
cast iron GG/GTS
cast iron GGG
cast iron GGG
hardened steel ≤ 55 HRC
hardened steel ≤ 55 HRC
stainless steel austenitic
stainless steel austenitic
stainless steel ferrit./martens.
stainless steel ferrit./martens.
steel < 1000 N/mm²
steel < 1000 N/mm²
steel < 1400 N/mm²
steel < 1400 N/mm²
steel < 700 N/mm²
steel < 700 N/mm²
superalloys Fe/NiCo based < 30 HRC
superalloys Fe/NiCo based < 30 HRC
superalloys Fe/NiCo based ≥ 30 HRc
superalloys Fe/NiCo based ≥ 30 HRc
titanium alloys
titanium alloys
    
very suitable
suitable
Catalogue page Download
Cutting values Download
STEP Download
DXF Download
Catalogue page Download
Cutting values Download
ASSET_MatSafetyDataSheet Download