Clamping

Standard bar gripper

Product finder

Product finder
PostBackSource:NULL
More filters
461050 Bar gripper set SET A
  • Article no.: 4610502007
Product description
461050 Bar gripper set SET AUser video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Bar gripper set with straight shank and gripper jaws
User video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Bar gripper set with straight shank and gripper jaws
subsequent delivery
from 589,00 €
Prices excl. VAT plus shipping costs
(2) Versions
461051 Bar gripper set VDI20 SET A
  • Article no.: 4610513042
Product description
461051 Bar gripper set VDI20 SET AUser video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Bar gripper set with VDI shank and gripper jaws
User video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Bar gripper set with VDI shank and gripper jaws
subsequent delivery
from 1.105,00 €
Prices excl. VAT plus shipping costs
(1) Versions
461054 Bar gripper with straight shank, clamping range 8 to 90 mm
  • Article no.: 4610542042
Product description
461054 Bar gripper with straight shank, clamping range 8 to 90 mmUser video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Bar gripper with straight shank, no gripper jaws
User video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Bar gripper with straight shank, no gripper jaws
subsequent delivery
from 195,00 €
Prices excl. VAT plus shipping costs
(3) Versions
461055 Bar gripper VDI20, clamping range 8 to 90 mm
  • Article no.: 4610552042
Product description
461055 Bar gripper VDI20, clamping range 8 to 90 mmUser video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Bar gripper with VDI shank, no gripper jaws
User video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Bar gripper with VDI shank, no gripper jaws
subsequent delivery
from 286,00 €
Prices excl. VAT plus shipping costs
(2) Versions
461056 Gripper jaws
  • Article no.: 4610562021
Product description
461056 Gripper jawsUser video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Standard gripper jaw set
User video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Standard gripper jaw set
subsequent delivery
from 54,00 €
Prices excl. VAT plus shipping costs
(6) Versions
461057 Gripper jaws SGB
  • Article no.: 4610570809
Product description
461057 Gripper jaws SGBUser video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Special gripper jaw set
User video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers
  • No surface damage to the bar stock to be machined
  • Grips bar stock Ø 3 - 90 mm
  • Operating method: Rapid traverse, 30 m/min
  • Accuracy: ± 0.1 mm (without stop)
  • Material projection length: 4 mm is enough for gripping
  • Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  • Operating method:
    After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  • Requirement:
    "Automatically open and close chuck" option
    The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer

Special gripper jaw set
subsequent delivery
from 160,00 €
Prices excl. VAT plus shipping costs
(1) Versions
461070 CNC bar gripper with VDI shaft
  • Article no.: 4610700020
  • Catalogue page: KS-1141
Product description
461070 CNC bar gripper with VDI shaftBar gripper
  • Indexable jaws for several clamping ranges
  • Wide clamping range
  • Quick and easy setting
  • Large range of clamping shanks

DIN 69880 (VDI)
Bar gripper
  • Indexable jaws for several clamping ranges
  • Wide clamping range
  • Quick and easy setting
  • Large range of clamping shanks

DIN 69880 (VDI)
in stock
from 639,00 €
Prices excl. VAT plus shipping costs
(4) Versions
461071 CNC bar gripper with straight shank
  • Article no.: 4610710020
  • Catalogue page: KS-1141
Product description
461071 CNC bar gripper with straight shankBar gripper
  • Indexable jaws for several clamping ranges
  • Wide clamping range
  • Quick and easy setting
  • Large range of clamping shanks

With straight shank
Bar gripper
  • Indexable jaws for several clamping ranges
  • Wide clamping range
  • Quick and easy setting
  • Large range of clamping shanks

With straight shank
in stock
from 749,00 €
Prices excl. VAT plus shipping costs
(4) Versions
461072 Reversible jaw set for CNC bar gripper
  • Article no.: 4610720001
  • Catalogue page: KS-1141
Product description
461072 Reversible jaw set for CNC bar gripperAccessories for Tschorn bar gripper
Indexable jaw set
Accessories for Tschorn bar gripper
Indexable jaw set
in stock
from 310,00 €
Prices excl. VAT plus shipping costs
(1) Versions