Drilling

Accessories: solid drilling tool with HSS cutting blades

Product finder

Product finder
PostBackSource:NULL
More filters
104505 Boring bar SARADRILL for boring head
  • Brand: SARA®
  • Article no.: 1045050100
  • Catalogue page: KS-0228
Product description
104505 Boring bar SARADRILL for boring headSARADRILL solid drilling tool
  • Machining of bore holes from Ø 49 to 270 mm
  • For machines with low drive power
  • Low-vibration, equipment-friendly machining with up to 50 % less drive power
  • Drilling in a single operation without centring and pre-drilling
  • No front face planing required
  • Cost-efficient boring system, since differences in diameter of up to 30 mm can be machined with one boring head by changing the cutting edges
  • Variable drilling depths of up to 15 x D due to holding fixture system with pluggable extensions
  • Internal coolant supply directly to the cutting edge, no high-pressure pump required
  • For rotating tools, the coolant is supplied via a coolant ring
  • Short chips due to chip-separating grooves in the roughing blade, no chip removal, even with extremely deep bores
  • Also for use on vertically operating machines
  • Low tool costs as wear is limited to the cutting edges and centre bit
  • Unproblematic regrinding of the centre bit and the cutting edges (in pairs) using the grinding fixture or the tool grinding machine
  • Cutting material:
    Cutting edge HSS-E-PM ASP30, ASP30 TiN
    HSS centre bit
  • For use on all machine tools as a rotating or stationary tool especially for machining large bore diameters on machines with low drive power
  • Caution: Not suitable for boring out existing holes!

Boring bar with Morse taper shank
in stock
from 251,60 €
Prices excl. VAT plus shipping costs
(9) Versions
104510 Extension 150 mm SARADRILL for boring head
  • Brand: SARA®
  • Article no.: 1045100055
  • Catalogue page: KS-0229
Product description
104510 Extension 150 mm SARADRILL for boring headSARADRILL solid drilling tool
  • Machining of bore holes from Ø 49 to 270 mm
  • For machines with low drive power
  • Low-vibration, equipment-friendly machining with up to 50 % less drive power
  • Drilling in a single operation without centring and pre-drilling
  • No front face planing required
  • Cost-efficient boring system, since differences in diameter of up to 30 mm can be machined with one boring head by changing the cutting edges
  • Variable drilling depths of up to 15 x D due to holding fixture system with pluggable extensions
  • Internal coolant supply directly to the cutting edge, no high-pressure pump required
  • For rotating tools, the coolant is supplied via a coolant ring
  • Short chips due to chip-separating grooves in the roughing blade, no chip removal, even with extremely deep bores
  • Also for use on vertically operating machines
  • Low tool costs as wear is limited to the cutting edges and centre bit
  • Unproblematic regrinding of the centre bit and the cutting edges (in pairs) using the grinding fixture or the tool grinding machine
  • Cutting material:
    Cutting edge HSS-E-PM ASP30, ASP30 TiN
    HSS centre bit
  • For use on all machine tools as a rotating or stationary tool especially for machining large bore diameters on machines with low drive power
  • Caution: Not suitable for boring out existing holes!

Extension
  • 150 mm and 300 mm

in stock
from 430,00 €
Prices excl. VAT plus shipping costs
(9) Versions
104515 Extension 300 mm SARADRILL for boring head
  • Brand: SARA®
  • Article no.: 1045150055
  • Catalogue page: KS-0229
Product description
104515 Extension 300 mm SARADRILL for boring headSARADRILL solid drilling tool
  • Machining of bore holes from Ø 49 to 270 mm
  • For machines with low drive power
  • Low-vibration, equipment-friendly machining with up to 50 % less drive power
  • Drilling in a single operation without centring and pre-drilling
  • No front face planing required
  • Cost-efficient boring system, since differences in diameter of up to 30 mm can be machined with one boring head by changing the cutting edges
  • Variable drilling depths of up to 15 x D due to holding fixture system with pluggable extensions
  • Internal coolant supply directly to the cutting edge, no high-pressure pump required
  • For rotating tools, the coolant is supplied via a coolant ring
  • Short chips due to chip-separating grooves in the roughing blade, no chip removal, even with extremely deep bores
  • Also for use on vertically operating machines
  • Low tool costs as wear is limited to the cutting edges and centre bit
  • Unproblematic regrinding of the centre bit and the cutting edges (in pairs) using the grinding fixture or the tool grinding machine
  • Cutting material:
    Cutting edge HSS-E-PM ASP30, ASP30 TiN
    HSS centre bit
  • For use on all machine tools as a rotating or stationary tool especially for machining large bore diameters on machines with low drive power
  • Caution: Not suitable for boring out existing holes!

Extension
  • 150 mm and 300 mm

subsequent delivery
from 509,00 €
Prices excl. VAT plus shipping costs
(9) Versions
104520 Carbide guide SARADRILL for boring head
  • Brand: SARA®
  • Article no.: 1045200070
  • Catalogue page: KS-0229
Product description
104520 Carbide guide SARADRILL for boring headSARADRILL solid drilling tool
  • Machining of bore holes from Ø 49 to 270 mm
  • For machines with low drive power
  • Low-vibration, equipment-friendly machining with up to 50 % less drive power
  • Drilling in a single operation without centring and pre-drilling
  • No front face planing required
  • Cost-efficient boring system, since differences in diameter of up to 30 mm can be machined with one boring head by changing the cutting edges
  • Variable drilling depths of up to 15 x D due to holding fixture system with pluggable extensions
  • Internal coolant supply directly to the cutting edge, no high-pressure pump required
  • For rotating tools, the coolant is supplied via a coolant ring
  • Short chips due to chip-separating grooves in the roughing blade, no chip removal, even with extremely deep bores
  • Also for use on vertically operating machines
  • Low tool costs as wear is limited to the cutting edges and centre bit
  • Unproblematic regrinding of the centre bit and the cutting edges (in pairs) using the grinding fixture or the tool grinding machine
  • Cutting material:
    Cutting edge HSS-E-PM ASP30, ASP30 TiN
    HSS centre bit
  • For use on all machine tools as a rotating or stationary tool especially for machining large bore diameters on machines with low drive power
  • Caution: Not suitable for boring out existing holes!

Carbide guide
  • For use with extremely deep bores

subsequent delivery
from 222,00 €
Prices excl. VAT plus shipping costs
(5) Versions
104540 Coolant ring SARADRILL for boring head
  • Brand: SARA®
  • Article no.: 1045400001
  • Catalogue page: KS-0229
Product description
104540 Coolant ring SARADRILL for boring headSARADRILL solid drilling tool
  • Machining of bore holes from Ø 49 to 270 mm
  • For machines with low drive power
  • Low-vibration, equipment-friendly machining with up to 50 % less drive power
  • Drilling in a single operation without centring and pre-drilling
  • No front face planing required
  • Cost-efficient boring system, since differences in diameter of up to 30 mm can be machined with one boring head by changing the cutting edges
  • Variable drilling depths of up to 15 x D due to holding fixture system with pluggable extensions
  • Internal coolant supply directly to the cutting edge, no high-pressure pump required
  • For rotating tools, the coolant is supplied via a coolant ring
  • Short chips due to chip-separating grooves in the roughing blade, no chip removal, even with extremely deep bores
  • Also for use on vertically operating machines
  • Low tool costs as wear is limited to the cutting edges and centre bit
  • Unproblematic regrinding of the centre bit and the cutting edges (in pairs) using the grinding fixture or the tool grinding machine
  • Cutting material:
    Cutting edge HSS-E-PM ASP30, ASP30 TiN
    HSS centre bit
  • For use on all machine tools as a rotating or stationary tool especially for machining large bore diameters on machines with low drive power
  • Caution: Not suitable for boring out existing holes!

Coolant ring
  • Compl. with coupling, grip bar and circlips

in stock
from 256,00 €
Prices excl. VAT plus shipping costs
(3) Versions
104570 Replacement shim SARADRILL for boring head
  • Brand: SARA®
  • Article no.: 1045700001
  • Catalogue page: KS-0229
Product description
104570 Replacement shim SARADRILL for boring headSARADRILL solid drilling tool
  • Machining of bore holes from Ø 49 to 270 mm
  • For machines with low drive power
  • Low-vibration, equipment-friendly machining with up to 50 % less drive power
  • Drilling in a single operation without centring and pre-drilling
  • No front face planing required
  • Cost-efficient boring system, since differences in diameter of up to 30 mm can be machined with one boring head by changing the cutting edges
  • Variable drilling depths of up to 15 x D due to holding fixture system with pluggable extensions
  • Internal coolant supply directly to the cutting edge, no high-pressure pump required
  • For rotating tools, the coolant is supplied via a coolant ring
  • Short chips due to chip-separating grooves in the roughing blade, no chip removal, even with extremely deep bores
  • Also for use on vertically operating machines
  • Low tool costs as wear is limited to the cutting edges and centre bit
  • Unproblematic regrinding of the centre bit and the cutting edges (in pairs) using the grinding fixture or the tool grinding machine
  • Cutting material:
    Cutting edge HSS-E-PM ASP30, ASP30 TiN
    HSS centre bit
  • For use on all machine tools as a rotating or stationary tool especially for machining large bore diameters on machines with low drive power
  • Caution: Not suitable for boring out existing holes!

Replacement clamps
  • For boring heads (prices per set of 2 heads)

in stock
from 143,00 €
Prices excl. VAT plus shipping costs
(10) Versions