High-performance drill SC 5xD 15.5mm IC D1=HB AlTiN+

High-performance drill SC 5xD 15.5mm IC D1=HB AlTiN+
High-performance drill SC 5xD 15.5mm IC D1=HB AlTiN+ High-performance drill SC 5xD 15.5mm IC D1=HB AlTiN+
Special offer:
60,91 €
(93,70 € catalogue price / 35% saved)
prices excl. vat plus shipping costs

Stock status
Only 4 pieces left!
Tool Finder

Ordered by 19:30 - delivered tomorrow.

Solid carbide high-performance drill bit
  • With coolant bore
  • Cutting material: ultra-fine grain solid carbide, AlTiN-coated
  • Conical surface grinding with secondary face

Solid carbide high-performance drill bit
  • With coolant bore
  • Cutting material: ultra-fine grain solid carbide, AlTiN-coated
  • Conical surface grinding with secondary face

Article no./ATORN no.
1115610155
Packaging unit
1
Catalogue page
DAILY-03

Technical characteristics

Coating AlTiN+
Coating AlTiN+
Coolant design Internal axial
Coolant design Internal axial
Cutting material Solid carbide
Cutting material Solid carbide
D m7 15,5 mm
D m7 15,5 mm
D1 h6 16 mm
D1 h6 16 mm
Drilling depth 5xD
Drilling depth 5xD
Feed f steel < 1000 N/mm² 0,31 mm/rev
Feed f steel < 1000 N/mm² 0,31 mm/rev
L 133 mm
L 133 mm
L1 83 mm
L1 83 mm
L3 63 mm
L3 63 mm
Point angle Point angle 140°
Point angle Point angle 140°
Shank Straight with driving plane, DIN 6535 HB
Shank Straight with driving plane, DIN 6535 HB
Spiral angle 30° RH helix angle
Spiral angle 30° RH helix angle
Standard constructional dimensions DIN DIN 6537
Standard constructional dimensions DIN DIN 6537
Type Type N
Type Type N

Usage characteristics

aluminium < 8 % Si
aluminium < 8 % Si
aluminium ≥ 8 % Si
aluminium ≥ 8 % Si
brass short
cast iron GG/GTS
cast iron GG/GTS
cast iron GGG
cast iron GGG
copper Cu-alloy
hardened steel < 55 HRc
hardened steel < 60 HRc
hardened steel < 60 HRc
hardened steel ≤ 55 HRC
stainless steel austenitic
stainless steel austenitic
stainless steel duplex
stainless steel duplex
stainless steel ferrit./martens.
stainless steel ferrit./martens.
steel < 1000 N/mm²
steel < 1000 N/mm²
steel < 1400 N/mm²
steel < 1400 N/mm²
steel < 700 N/mm²
steel < 700 N/mm²
superalloys Fe/NiCo based < 30 HRC
superalloys Fe/NiCo based < 30 HRC
superalloys Fe/NiCo based ≥ 30 HRc
superalloys Fe/NiCo based ≥ 30 HRc
titanium alloys
titanium alloys
    
very suitable
suitable
STEP Download
DXF Download