Solid carbide high-performance drill 3xD 9,5mm IC D1=HB TiN

Solid carbide high-performance drill 3xD 9,5mm IC D1=HB TiN
Solid carbide high-performance drill 3xD 9,5mm IC D1=HB TiN Solid carbide high-performance drill 3xD 9,5mm IC D1=HB TiN
Price
74,10 €
prices excl. vat plus shipping costs

Stock status
in stock
Add to shopping cart
Tool Finder

Ordered by 18:00 - delivered tomorrow.

TiNplus HPC 3D solid carbide high-performance drill bit with internal cooling
  • Newly developed geometry with reinforced core and special point thinning
  • Solid carbide ultra-fine grain cutting material TiNplus (TiAlN+TiN)
  • Modern multi-layer hard coating for maximum service life and optimum chip transport
  • High centring accuracy
  • For universal applications
  • Optimised shank diameter tolerance for use as a holding fixture in power chucks and hydraulic expansion chucks
  • With internal cooling

TiNplus HPC 3D solid carbide high-performance drill bit with internal cooling
  • Newly developed geometry with reinforced core and special point thinning
  • Solid carbide ultra-fine grain cutting material TiNplus (TiAlN+TiN)
  • Modern multi-layer hard coating for maximum service life and optimum chip transport
  • High centring accuracy
  • For universal applications
  • Optimised shank diameter tolerance for use as a holding fixture in power chucks and hydraulic expansion chucks
  • With internal cooling

Article no./ATORN no.
1115070095
Packaging unit
1
Catalogue page

Technical characteristics

Angle of the tip - S 140 °
Coating TiN plus
Coating TiN plus
Coolant supply Internal
Coolant supply Internal
Cutting data Cutting angle Information - yes
Cutting data Cutting angle Information - yes
Cutting material Solid carbide
Cutting material Solid carbide
D 9,5 mm
D 9,5 mm
D1 10 mm
D1 10 mm
DIN 6537
DIN 6537
Feed f steel < 1000 N/mm² 0,32 mm/rev
Feed f steel < 1000 N/mm² 0,32 mm/rev
L 89 mm
L 89 mm
L1 47 mm
L1 47 mm
Max. drilling depth (D) 3xD
Max. drilling depth (D) 3xD
S 140 °
Section shape Split point
Section shape Split point
Tool holding device HB parallel shank
Tool holding device HB parallel shank
Twist angle 30°
Twist angle 30°
Type U
Type U

Usage characteristics

aluminium < 8 % Si
aluminium < 8 % Si
aluminium ≥ 8 % Si
aluminium ≥ 8 % Si
brass short
brass short
cast iron GG/GTS
cast iron GG/GTS
cast iron GGG
cast iron GGG
hardened steel < 60 HRc
hardened steel < 60 HRc
hardened steel ≤ 55 HRC
hardened steel ≤ 55 HRC
stainless steel austenitic
stainless steel austenitic
stainless steel duplex
stainless steel duplex
stainless steel ferrit./martens.
stainless steel ferrit./martens.
steel < 1000 N/mm²
steel < 1000 N/mm²
steel < 1400 N/mm²
steel < 1400 N/mm²
steel < 700 N/mm²
steel < 700 N/mm²
superalloys Fe/NiCo based < 30 HRC
superalloys Fe/NiCo based < 30 HRC
superalloys Fe/NiCo based ≥ 30 HRc
superalloys Fe/NiCo based ≥ 30 HRc
titanium alloys
titanium alloys
    
very suitable
suitable
Cutting values Download
STEP Download
DXF Download
Cutting values Download