Solid carbide high-performance drill 3xD 8mm D1=HB TiN

Solid carbide high-performance drill 3xD 8mm D1=HB TiN
Solid carbide high-performance drill 3xD 8mm D1=HB TiN Solid carbide high-performance drill 3xD 8mm D1=HB TiN
Price:
37,00 €
prices excl. vat plus shipping costs

Stock status
in stock
Add to shopping cart
Tool Finder

Ordered by 19:30 - delivered tomorrow.

TiNplus HPC 3D solid carbide high-performance drill bit without internal cooling
  • Newly developed geometry with reinforced core and special point thinning
  • Solid carbide ultra-fine grain cutting material TiNplus (TiAlN+TiN)
  • Modern multi-layer hard coating for maximum service life and optimum chip transport
  • High centring accuracy
  • For universal applications
  • Optimised shank diameter tolerance for use as a holding fixture in power chucks and hydraulic expansion chucks
  • Shank designs up to Ø 2.9 mm HA, from Ø 3.0 mm HB

TiNplus HPC 3D solid carbide high-performance drill bit without internal cooling
  • Newly developed geometry with reinforced core and special point thinning
  • Solid carbide ultra-fine grain cutting material TiNplus (TiAlN+TiN)
  • Modern multi-layer hard coating for maximum service life and optimum chip transport
  • High centring accuracy
  • For universal applications
  • Optimised shank diameter tolerance for use as a holding fixture in power chucks and hydraulic expansion chucks
  • Shank designs up to Ø 2.9 mm HA, from Ø 3.0 mm HB

Article no./ATORN no.
1115030080
Packaging unit
1
Catalogue page

Technical characteristics

Angle of the tip - S 140 °
Angle of the tip - S 140 °
Coating TiN plus
Coating TiN plus
Coolant supply No
Coolant supply No
Cutting data Cutting angle Information - yes
Cutting data Cutting angle Information - yes
Cutting material Solid carbide
Cutting material Solid carbide
D 8 mm
D 8 mm
D1 8 mm
D1 8 mm
DIN 6537
DIN 6537
Feed f steel < 1000 N/mm² 0,16 mm/rev
Feed f steel < 1000 N/mm² 0,16 mm/rev
L 79 mm
L 79 mm
L1 41 mm
L1 41 mm
Max. drilling depth (D) 3xD
Max. drilling depth (D) 3xD
Section shape Split point
Section shape Split point
Tool holding device HB parallel shank
Tool holding device HB parallel shank
Twist angle 30°
Twist angle 30°
Type U
Type U

Usage characteristics

aluminium < 8 % Si
aluminium < 8 % Si
aluminium ≥ 8 % Si
aluminium ≥ 8 % Si
brass short
brass short
cast iron GG/GTS
cast iron GG/GTS
cast iron GGG
cast iron GGG
hardened steel < 60 HRc
hardened steel < 60 HRc
hardened steel ≤ 55 HRC
hardened steel ≤ 55 HRC
stainless steel austenitic
stainless steel austenitic
stainless steel duplex
stainless steel duplex
stainless steel ferrit./martens.
stainless steel ferrit./martens.
steel < 1000 N/mm²
steel < 1000 N/mm²
steel < 1400 N/mm²
steel < 1400 N/mm²
steel < 700 N/mm²
steel < 700 N/mm²
superalloys Fe/NiCo based < 30 HRC
superalloys Fe/NiCo based < 30 HRC
superalloys Fe/NiCo based ≥ 30 HRc
superalloys Fe/NiCo based ≥ 30 HRc
titanium alloys
titanium alloys
    
very suitable
suitable
Catalogue page Download
Cutting values Download
STEP Download
DXF Download
Catalogue page Download
Cutting values Download